# Which MakeMKV Version Do You Need for 4K UHD on Linux?

- Link: https://wordpress.theicealphawolfden.com/index.php/2026/10/25/which-makemkv-version-do-you-need-for-4k-uhd-on-linux/
- Published: 2026-10-25T09:39:53+01:00
- Author: Kiba Snowpaw

I used MakeMKV to rip my discs, but it would not open my 4K UHD discs. Whatever 
I tried, it kept ending with **“Failed to open disc.”** The drive had already ripped
UHD discs with DVDFab, and I wanted to get the job working in Linux.

I tried the hashed-key text file without success. I was using the Snap Store installation,
so I looked for another package and found the `heyarje/makemkv-beta` PPA. After 
installing `makemkv-bin` and `makemkv-oss` from there, I could rip my 4K UHD discs
with MakeMKV.

**Updated: 25 October 2026.** The commands below cover the Ubuntu PPA I used, followed
by checks for Snap permissions, LibreDrive and disc keys.

## Which version should you install?

Use a current MakeMKV release with a UHD-compatible LibreDrive drive. UHD support
is part of MakeMKV itself; the PPA’s `beta` name identifies the repository. As checked
on 25 October 2026, these sources list different versions:

| Source | Version checked | Details | 
| [Official MakeMKV release](https://www.makemkv.com/download/) | **2.0.0** | Released 20 September 2026; also available through the [official Linux installation instructions](https://forum.makemkv.com/forum/viewtopic.php?t=224). | 
| [heyarje PPA](https://launchpad.net/~heyarje/+archive/ubuntu/makemkv-beta) | **2.0.0-1~noble** | Both components in the [Ubuntu 24.04 “noble” amd64 package index](https://ppa.launchpadcontent.net/heyarje/makemkv-beta/ubuntu/dists/noble/main/binary-amd64/Packages.gz). Check your own release and architecture. | 
| [Snap Store, latest/stable](https://snapcraft.io/makemkv) | **1.18.3** | Stable listing last updated 23 February 2026. Use `snap info makemkv` for your available channels and architecture. |

MakeMKV’s [revision history](https://www.makemkv.com/download/history.html) lists
initial support for unencrypted UHD discs in **1.10.8, released 18 November 2017**.
Later versions developed UHD handling further. Version 1.18.3 updated the LibreDrive
and AACS runtime; the 2.0.0 notes describe mainly a version bump and small fixes.
Keep the application updated as disc support and fixes change.

## Install the Ubuntu PPA packages

The [heyarje PPA](https://launchpad.net/~heyarje/+archive/ubuntu/makemkv-beta) is
a third-party Ubuntu package archive. Check its [release directories](https://ppa.launchpadcontent.net/heyarje/makemkv-beta/ubuntu/dists/)
and package list for your Ubuntu base and architecture. Linux Mint uses an Ubuntu
base codename, which can differ from Mint’s own codename. On Ubuntu or an Ubuntu-
based Mint installation, check:

    ```wp-block-code
    . /etc/os-release
    printf 'Ubuntu base: %s\n' "${UBUNTU_CODENAME:-${VERSION_CODENAME:-unknown}}"
    dpkg --print-architecture
    ```

For a supported release, add the PPA, update the package lists and inspect the available
versions:

    ```wp-block-code
    sudo add-apt-repository ppa:heyarje/makemkv-beta
    sudo apt-get update
    apt-cache policy makemkv-bin makemkv-oss
    ```

Look at the **Candidate** versions and repository URLs. Once the expected packages
are available, install both components:

    ```wp-block-code
    sudo apt-get install makemkv-bin makemkv-oss
    ```

`makemkv-oss` supplies the open-source components and `makemkv-bin` supplies the
proprietary component. The [upstream Linux instructions](https://forum.makemkv.com/forum/viewtopic.php?t=224)
also provide both parts. Open MakeMKV and check **Help → About** to confirm which
version actually launched.

If APT reports that the PPA has no Release file for your Ubuntu release, use a package
built for your system or the upstream Linux build instructions. The Ubuntu PPA commands
are for Ubuntu-based systems; use the appropriate packaging route on other distributions.

## Check the Snap installation before replacing it

The current Snap package has its own release channel and device permissions. Check
the installed version, available updates and connected interfaces:

    ```wp-block-code
    snap list makemkv
    snap info makemkv
    snap connections makemkv
    ```

To update the installed Snap in its selected channel:

    ```wp-block-code
    sudo snap refresh makemkv
    ```

The publisher’s [build recipe](https://github.com/diddlesnaps/makemkv/blob/master/snap/snapcraft.yaml)
declares `optical-drive`, `optical-write` and `removable-media` plugs. `optical-
write` is its name for an optical-drive connection with broader device access. Canonical
documents that the write-enabled optical interface does not auto-connect by default.
For either optical plug shown as disconnected in your own connection list, connect
the corresponding plug:

    ```wp-block-code
    sudo snap connect makemkv:optical-drive
    sudo snap connect makemkv:optical-write
    ```

If you are saving to mounted storage under `/media`, `/run/media` or `/mnt`, check
the [removable-media connection](https://snapcraft.io/docs/reference/interfaces/removable-media-interface/)
as well. Connect it when that access is required and the plug is disconnected:

    ```wp-block-code
    sudo snap connect makemkv:removable-media
    ```

Launch the Snap explicitly while testing that installation:

    ```wp-block-code
    snap run makemkv
    ```

If you have several installations, their launchers can look almost identical. Check
the version in the window you opened before comparing results.

## Check the drive and LibreDrive status

MakeMKV’s developer identifies [LibreDrive compatibility](https://forum.makemkv.com/forum/viewtopic.php?t=18856)
as a requirement for UHD reading. In MakeMKV, look under **Drive Information** for
the exact model and firmware revision, then check **LibreDrive Information**. A 
UHD-capable drive still needs a supported combination of hardware, firmware and 
access from the running application.

The [UHD FAQ](https://forum.makemkv.com/forum/viewtopic.php?t=16883) links to the
current drive guidance. Use the exact model and firmware revision when checking 
compatibility or considering a firmware change.

[⌊MakeMKV on Linux showing drive information, LibreDrive enabled and a drive-access
warning in its log.⌉⌊MakeMKV on Linux showing drive information, LibreDrive enabled
and a drive-access warning in its log.⌉[

MakeMKV 1.14.5 in a 2019 screenshot from the Snap Store listing. LibreDrive is enabled,
while the log reports incomplete drive access. This is an older publisher screenshot.
[Source: MakeMKV on the Snap Store](https://snapcraft.io/makemkv). MakeMKV interface:
GuinpinSoft.

## Read the error before changing packages again

“Failed to open disc” is the final result. The preceding log messages tell you which
part failed:

| Message or symptom | What to check | 
| No drive, access denied, or incomplete drive access | Device access for the installation you launched. For Snap, inspect its optical connections; native packages use the system’s device permissions. | 
| `Automatic HK downloading is disabled or failed` | Enable internet access in **Preferences → General**, then investigate network, DNS or firewall failures using the [current support thread](https://forum.makemkv.com/forum/viewtopic.php?t=24711). | 
| `The volume key is unknown for this disc` | Check that updates can download. If the key is still unavailable, follow the [official instructions for the generated AACS `.tgz` dump](https://forum.makemkv.com/forum/viewtopic.php?t=16883). Different pressings of the same film can need different keys. | 
| `MEDIUM ERROR` or repeated unreadable sectors | Inspect and clean the disc and check the physical reading problem. The [UHD FAQ](https://forum.makemkv.com/forum/viewtopic.php?t=16883) discusses dirty or defective media. |

MakeMKV normally downloads its UHD hashed-key data automatically when internet access
is enabled. A saved text file from an old guide can be out of date. The [SDF data used for drive support](https://forum.makemkv.com/forum/viewtopic.php?t=18856)
is another part of the setup, so retain the exact SDF or HK error when asking for
help.

## Registration keys and disc keys

A **registration or beta key** unlocks application features. **UHD hashed keys**
are disc-related data. If the application reports a trial or registration problem,
use **Help → Register** with your valid licence or the [current official beta key](https://forum.makemkv.com/forum/viewtopic.php?t=1053).
The published beta key expires and is replaced periodically.

MakeMKV’s [licensing page](https://www.makemkv.com/buy/) describes DVD conversion
as free and Blu-ray functionality as shareware with a 30-day trial. As checked on
25 October 2026, it also says new licence purchases are temporarily unavailable 
and directs users to a beta key. Use the current official pages for that changing
status.

## Once the disc opens

 1. Select the optical drive and open the disc in MakeMKV.
 2. Check the titles, durations, audio languages and subtitle tracks, then select the
    material you want to keep.
 3. Choose an output folder with enough free space for the displayed estimate and start
    the MKV conversion.
 4. Open the resulting file in your player and check the picture, selected audio, subtitles
    and chapters.

MakeMKV’s normal conversion preserves the selected video and audio streams while
putting them into MKV files. It keeps their original resolution and compression;
it does not upscale the picture or automatically make a small, re-encoded copy.

## Sources and installation references

 * [MakeMKV downloads](https://www.makemkv.com/download/), [revision history](https://www.makemkv.com/download/history.html)
   and [official Linux installation instructions](https://forum.makemkv.com/forum/viewtopic.php?t=224).
 * [heyarje MakeMKV PPA](https://launchpad.net/~heyarje/+archive/ubuntu/makemkv-beta),
   its [published Ubuntu release directories](https://ppa.launchpadcontent.net/heyarje/makemkv-beta/ubuntu/dists/)
   and the [noble amd64 package index](https://ppa.launchpadcontent.net/heyarje/makemkv-beta/ubuntu/dists/noble/main/binary-amd64/Packages.gz).
 * [MakeMKV Snap Store listing](https://snapcraft.io/makemkv) and the publisher’s
   [Snap build recipe](https://github.com/diddlesnaps/makemkv/blob/master/snap/snapcraft.yaml).
 * Canonical’s [optical-drive](https://snapcraft.io/docs/reference/interfaces/optical-drive-interface/)
   and [removable-media](https://snapcraft.io/docs/reference/interfaces/removable-media-interface/)
   documentation.
 * MakeMKV forum: [What is LibreDrive?](https://forum.makemkv.com/forum/viewtopic.php?t=18856),
   [UHD FAQ](https://forum.makemkv.com/forum/viewtopic.php?t=16883) and [Fixing Volume Key is Unknown](https://forum.makemkv.com/forum/viewtopic.php?t=24711).
 * [Official beta-key announcement](https://forum.makemkv.com/forum/viewtopic.php?t=1053),
   [licensing status](https://www.makemkv.com/buy/) and [MakeMKV feature description](https://www.makemkv.com/).
